A Guide to Cleaning Up after Construction

Construction Worker Vacuuming On a Construction Site

After a home construction or renovation project, you understandably want to start enjoying the results. However, the work area may be covered in filth. This filth may include various types of construction debris, sawdust, general grime and more. Cleaning after a construction project is a major undertaking, and there are a few steps that you can take to complete the work faster and with minimal hassle.

Start After the Dust Settles

 

You may be inclined to start cleaning the work area as soon as the construction has been completed. However, in many cases, dust and fine particles from the project may linger in the air. The last thing that you want is to clean the space now only to find that the area is once again coated with dust soon. The best time to clean up a construction zone is after all of the dust has settled and the air is clean.

 

Open the Windows

 

You may be inclined to turn on a ceiling fan when a room is filled with construction dust, but this should be avoided. This will simply increase the amount of time that it takes for the dust to settle because the dust will continue circulating in the air. However, you can and should open external doors and windows, if possible. Doing so will allow some of the debris to work its way outdoors. Once you start cleaning the space, however, close the doors and windows. This will help you to contain the filth for easier cleanup.

 

Clean from the Top Down

 

 

The construction dust can land on all surfaces in the room, including on the walls and ceiling. As you clean the ceiling and walls, some of the debris will inevitably fall downward. Because of this, it is often easier and faster to clean the ceiling first. Follow this by dusting off the air vents and light fixtures. Then, work your way down the walls and to the cabinets and counters before you start on the floors.

 

Use a Shop Vac

 

Are you wondering what the best cleaning method is? Between dusters, brooms and vacuums, you have a few options available to consider. Dusters and brooms should be avoided. While you may be able to move some of the debris into a pile using these cleaning devices, you will also kick the dust back into the air. This means that you must then wait for the debris to settle again before continuing.

Your household vacuum is an option, but it may not be designed to handle the amount of debris in question. In fact, you may find yourself emptying the collection container every few minutes. The best cleaning device to use is a shop vacuum. This is a heavy-duty or industrial-grade vacuum that is specifically designed to handle big cleaning chores. You can use the shop vac to suction dirt off of the ceiling, walls, counters, cabinets and floors.

 

Wipe Down Hard Surfaces

 

The shop vacuum will pull most of the dust and debris out of the room, but you may be dismayed to discover that a light layer of debris remains. If this is the case, it may be time to get out a clean cloth and a bucket of clean water. You can use a lightly damp cloth to wipe down everything from hard floors and cabinets to counters and drywall. Ensure that you carefully wring excess moisture from the cloth before wiping the surfaces. Also, remember to change out the water in the bucket from time to time and to continually clean off the cloth. Otherwise, you may discover that you are simply spreading wet dust around the room.

 

Wash the Windows

 

 

Even after you have taken all of these steps to clean the construction area, there may still be one area that requires your attention. The windows may have collected a layer of dust as well. This can make the room seem dark and hazy even after all of the other debris has been removed. To make this cleaning task easier, you may wish to run the shop vac over the windows to remove loose debris. Then, use a streak-free glass cleaner and a dry cloth to clean the windows as you normally would. If the windows are very dirty, it may be necessary to repeat the process a few times in order to get them crystal clear.

 

 

The unfortunate reality is that it can take hours to thoroughly clean a construction area using the right techniques. This type of floor-to-ceiling cleaning project is labor-intensive, and it may be more frustrating than you initially think. After all, dust will inevitably start to circulate in the space again as soon as you start cleaning. Are you wondering if there is a better way to clean your space? At our Denver cleaning company, we offer specialized cleaning services for projects like this. Before you stress about the big cleaning task in front of you, contact us today to request an estimate.

icon

Get notified of new articles

53,398 marketers are already subscribed to Cleanzen Blog. Leave your email to get our weekly newsletter

Hidden

No charge. Unsubscribe anytime.

icon

Cleanzen Blog Comment Policy

We welcome revelant and respectful comments. Off-topic comments and spam will be removed.