Get a Clean, Spotless Shower Without Scrubbing

When you want to get cleaned with a satisfying shower, you cannot get that accomplished in a dirty stall or tub. Instead, you will need a spotless, sanitized area to use. If you have neglected your shower for a while, the surfaces may get covered with dirt, mildew, or hard water stains. This grime is tough to look at and can prevent you from getting the effective clean you need. To help you get past this problem, here are effective ways to get your shower spotless and sparkling again.

 

Typically, the most advantageous time to clean your shower is immediately after using it. The water and steam that is already there will loosen any dirt and make it easier to tidy. However, it would be best to use caution with ingredients that have essential oils added. Lemon, orange, lavender, and eucalyptus are effective around the home but can make your shower floor slippery.

 

With a busy schedule or lively household, you may miss the opportunity to tidy up immediately after each shower. Here are easy ways to get a fresh, clean shower with minimal scrubbing.

 

Gather The Best Shower Cleaning Tools

 

If you use inadequate tools to take away your dirt and grim, you will not see the best results. But, if you grab the right cleaning supplies, you can see a tremendous difference. Instead of choosing a sponge, try a sturdy brush and squeegee to clear away excess water that can lead to water spots and a buildup of soap scum.

 

You will also need a cleaner that works best with your shower’s material. Before making a purchase or using a homemade solution, check with the manufacturer’s directions for the best ingredients to use.

 

 

Cleaning a Showerhead

 

 

Over time, mineral deposits from your water will collect on your showerhead. Fortunately, you can get these sediments without removing it from the shower. Just start with a plastic bag filled with vinegar. Open and lift it around the showerhead, and secure it on with a string or rubber band. Allow it to stay in place for an hour before removing it and wiping the fixture with a soft, clean cloth. Once you finish, turn your water on to push the residual vinegar out of the nozzle. You can repeat this once a month to prevent buildups in the future.

 

 

Cleaning a Fiberglass Shower

 

Fiberglass and acrylic showers are a popular choice for many homes because of their reasonable price and simple method of installation. With these, you want to stay from abrasive cleaning products that add scratches to the surface. You will get better results with a gentle soap or a DIY mixture of vinegar and dish detergent.

 

 

Once you choose your cleanser, use it along with a soft-bristled brush to address the entire shower. Pay special attention to the corners and faucet to get a thorough clean. Often, the shower floor gets more stained than the rest, so sprinkle it with baking soda along with the dish soap-vinegar solution. Allow it to sit for 10-15 minutes before washing it away. After doing this, you should be ready to rinse the shower with water and swipe the residue away with your squeegee.

 

 

Cleaning a Tile Shower

 

Although ceramic or porcelain tiles are long-lasting and low-maintenance, the grout between tiles can be a hiding place for mildew and grime. To clean these areas, you can try the appropriate cleaning products from any local store, or you can mix vinegar into a small amount of dish soap. Letting this rest on your tile will loosen the dirt and make it much easier to clean. After the cleaning solution has sat on the shower surface for 10 minutes, scour it with your soft-bristled brush and rinse well afterward.

 

 

If your grout is has become darkened from the constant use, you will need a tougher product to get it whitened again. Make a paste of two parts baking soda with one part vinegar and use it on the grout. When the appearance gets restored, rinse the shower and use the squeegee to clear the remaining water.

 

Cleaning a Stone Shower

 

With natural stones, you can create an attractive design that will compliment your overall bathroom design. Each stone has a different level of absorbency and vulnerability, so you will need to protect the surface by skipping course tile cleaners or acidic ingredients like lemon and vinegar. Instead, stick with cleaning products uniquely designed for your stone or a blend of dish soap combined with water. Unlike other materials, you will want to use a gentler method that includes clean, soft cloth.

 

 

Cleaning a Glass Shower Door

 

 

 

If your shower has a glass door, it can get just as dirty as the other parts of the stall. To improve the appearance, try a glass cleaner or the same vinegar and soap mixture mentioned above.

Spray the vinegar solution to both sides of the door and use a sponge or cloth to wipe it away.  After tackling the door, remember to clean the tracks as well.

 

An Easier Way to Keep Your Home Clean

 

Bathing in a dirty shower is not the best way to get clean. But, you may struggle to keep your bathroom as spotless as you would like. Along with that, you may have other areas of your home you want to be neater and more organized.

 

Maintaining a pristine home can take more time and energy than you can invest in one place. Also, you will have unexpected messes and blemishes, which make completing your housework an increased challenge. Fortunately, the Cleanzen Providers are delighted to serve in your home. Reach out to us today to discover more about our helpful services.

icon

Get notified of new articles

53,398 marketers are already subscribed to Cleanzen Blog. Leave your email to get our weekly newsletter

Hidden

No charge. Unsubscribe anytime.

icon

Cleanzen Blog Comment Policy

We welcome revelant and respectful comments. Off-topic comments and spam will be removed.