Few things compare to taking a shower after a great workout or a long day at work. Perhaps you prefer to start your mornings off with a refreshing shower. However, enjoying a shower is difficult when you spot mildew, soap scum or other signs of filth.
Often, people gloss over the shower when cleaning the rest of their house because it’s a hassle. Even if you give your shower the attention that you think it deserves, you may not be cleaning your shower properly. How should you clean your shower?
Things like soap scum, mildew and even a pinkish layer of filth are commonly found in showers. These layers accumulate in thicker quantities over time, which makes them much more difficult to clean.
The ideal frequency to clean a shower that is used daily is once a week. If your secondary showers are used less frequently, plan to clean them every few weeks.
Cleaning your shower requires special attention to each of its individual features. Here’s what you need to know.
One of the most problematic areas of a shower is the grout between the tiles. However, with the right cleaning solution, mildew and mold can disappear.
Make a cleaning paste using one part distilled white vinegar and two parts baking soda. Be sure to make enough to coat the grout across the entire shower. Apply the paste, and wait at least five minutes. The grime will then be easier to scrub off with a toothbrush or a special grout brush. After scrubbing, rinse the paste off, and dry the grout with a towel.
Porcelain and ceramic tiles are commonly found in showers because of their low maintenance needs and durability. Bathroom tiles can usually safely be cleaned with a general tile cleaning product, or you can use a solution made from dish soap and vinegar.
Spray the tiles, or use a clean sponge to apply the cleaner to the tiles. Allow your cleaning solution to break down the grime by letting it sit undisturbed for several minutes. You can then scrub it with a soft-bristle brush. Rinse the cleaner off of the walls. Then, use a clean towel or squeegee to wick off the water.
To thoroughly clean your shower, your drain also needs attention. First, remove the drain plug, and soak it in vinegar while you complete the other steps.
Use an unwound metal hanger or a drain snake to remove any clogs building up in the pipe. You can also run pure white vinegar down the drain to remove any soap scum buildup in the pipe. Then, rinse the drain and drain plug with clean water.
Dirty shower doors can make your entire bathroom feel dirty, and they can impact your shower experience. White vinegar can break down the soap scum and hard water that builds up on shower doors.
In a bowl, heat a 50-50 mixture of liquid dish soap and vinegar. Then, use a spray bottle to apply your homemade cleaner to the shower doors. This grime can be tough to remove, so let the solution sit on the doors for at least 30 minutes. Use a clean, damp sponge to wipe the filth off. Then, rinse the doors, and use a squeegee to dry them.
Here’s another cleaning recommendation that you can try at home:
@cleanthatup How to clean glass shower doors quick and easy! #cleantok #howto #cleaning #cleaningtips #cleaninghacks #cleaningmotivation #cleanthatup #cleanwithme #satisfying
If your shower walls are made out of durable acrylic or fiberglass, you can scrub them with a soft-bristle scrubber and either a homemade cleaner or your preferred store-bought product.
An easy homemade solution is made with equal parts of liquid dish soap and distilled white vinegar. For an easier cleaning session, let the cleaner sit on the surfaces for at least 10 minutes before scrubbing. After scrubbing the grime off, rinse with clean water, and wipe down the shower walls with a towel.
Your shower head can get just as grimy as the other surfaces. Mineral deposits from hard water are most problematic. To break down hard water deposits, fill a plastic bag with white vinegar.
Immerse the showerhead in the vinegar, and use a rubber band to secure the plastic bag. After an hour, remove the bag, and turn the faucet on. Then, turn the water off, and dry the feature with a microfiber cloth.
Each time you clean your shower, you should clean the shower curtain and liner. These features can get just as just as dirty as the rest of your shower.
Both your shower curtain and liner can typically go in the washing machine, but refer to the care labels. However, the liner should air dry. Do not use the clothes dryer.
A dirty shower is often covered in hard water residue, soap scum, mildew and mold. There may also be problematic stains. How do you clean these elements off of your shower?
The acidic nature of white vinegar is effective at breaking down the minerals in hard water. If hard water is the primary issue, you can spray diluted vinegar directly on the surface. After several minutes, sprinkle baking powder on a soft brush. Scrub the surfaces until all signs of hard water are removed.
Several products can be used to clean mold and mildew in a shower, but do not mix these products.
A general mold-and-mildew cleaning product often works well when the instructions are followed. Bleach, vinegar, baking soda, hydrogen peroxide and tea tree oil are also effective at killing mold and mildew in the shower.
Hard water stains often come with soap scum. Soap scum can be removed using the same process as hard water.
Commonly, stains in a shower are from rust created by metal fixtures and personal hygiene products with metal containers.
Spray your choice of lemon juice or white vinegar on the stain. After approximately a half hour, pour a layer of baking soda on the stain. Use a soft, damp cloth or sponge to wipe the stain away. If the stain is tough or in a hard-to-reach area, scrub the stain with a toothbrush. Use warm water to rinse the affected area before drying it with a clean cloth.
Here’s more tips on how to properly clean your showers like a pro:
Cleaning the shower is never any fun, and the good news is that you can keep your shower cleaner longer with a few easy steps.
The best thing to clean a shower with depends on the types of surfaces that need to be cleaned. Many store-bought cleaners are safe on most surfaces, but you should always read the label.
In addition, a mixture of vinegar and dish soap is an effective do-it-yourself cleaner for many common types of shower materials.
Vinegar is a natural ingredient with acidic properties. Because of its acidic content, it is effective at cutting through soap scum, mildew and mold.
Vinegar is commonly combined with liquid dish soap to clean many surfaces in the shower.
The quickest way to clean a shower is to remove the curtain, liner and all personal items from the shower first. Choose a multi-purpose cleaner that is suitable for your shower walls, doors. This allows you to clean all of the surfaces at one time.
Your shower is only one of many places where gunk can build up over time. If you need assistance scrubbing your bathrooms or you want top-to-bottom results with deep cleaning services Boston, our professional cleaners are ready to help. To book a cleaning service for your home, contact the Cleanzen team today.
Cleanzen Blog Comment Policy
We welcome revelant and respectful comments. Off-topic comments and spam will be removed.
0 comments